Household hardware tool list

Generally, families will prepare some hardware tools more or less. In the decoration and daily life, changing a light bulb, making a shelf, dealing with raised nails and other repairs are often used. The frequency of use is very high, so there is no need to find a special one. Repairman, save time and money. So what are the commonly used hardware tools? Let’s take a look at the essential tools of the family toolbox!

Screwdriver This is the most used. Usually it is very useful for screwing a screw, installing a computer, or furniture. It usually has a thin wedge-shaped head that can be inserted into the slot or notch of the screw head. There are mainly two types: one word and cross. Hexagonal screwdrivers are also common, including inner and outer hexagons.

There are basically two types of wrenches, dead wrenches and adjustable wrenches. They use the principle of leverage to turn bolts, nuts, screws, and other threads. Usually, there are clamp handles on one or both ends of the handle. With external force applied to the handle, bolts, nuts, etc. can be turned.

The tape measure can test the length, width, and height of the object. Sometimes the space is limited, and the items to be purchased must be based on the size. Therefore, the length and width of the object can be measured by the tape measure, which is conducive to the choice of the size of the purchased furniture. The trouble of return and exchange caused by the size.

Hammer The most commonly used hitting tool is composed of a hammer head and a hammer handle. It is most commonly used for hammering nails, correcting or knocking objects open. When using a hammer, check whether the connection between the hammer head and the hammer handle is firm, otherwise you will get injured. Be careful when using it and don’t hit your hands.

Test pencil, also called test pencil, is used to test whether there is electricity in the wire. When using the test pen, be sure to touch the metal part of the end of the test pen with your hand, put your index finger against the cap end of the pen, gently pinch the pen with your thumb, middle finger, and ring finger, and insert the metal pen tip into the socket hole.

The utility knife is commonly known as a carving knife or a wallpaper knife. It is a knife for fine arts and handicrafts. It is mainly used to cut softer things. There are different sizes of utility knives, both small and large, the large one is about 20 cm, and the small one is about 10 cm. You can choose according to the actual situation.

Pliers Pliers can replace human hands to handle some sharp and sharp tools, such as removing nails from wooden boards and pulling glass out of walls. They are useful and prevent hands from being scratched. There are many types of pliers, such as wire cutters, needle-nose pliers, diagonal pliers, round-nose pliers and so on.

Hacksaws are commonly known as hand saws, which can cut smaller round steel, angle steel, flat steel and workpieces, and can also be used to saw small pieces of wood and plastic products. In general use, install the saw blade with the tip of the tooth facing forward, but if you find that it is easier to stab the tooth during use, install the tip of the tooth toward you.

BT12 BT46 BT142

Hardware tool purchase

1. Expensive and not expensive. In daily life, home repairs are the simple tasks of screwing screws, nailing nails, and changing light bulbs. Therefore, you only need to select some common tools to purchase manual tools.

2. Whether there are turbid oil stains on the surface. When purchasing, you can check whether the product will leave thick oil stains on your hands and whether it will be sticky on your hands. If there are, this product is generally unqualified. In addition, it can be distinguished by smell. If the product has a pungent odor, there is usually an omission in the production.

3. Whether the steel stamp is clear. Hardware products are usually printed with brand words and labels. The font is very small, but most of the products produced by the factory use stencil printing technology, and the characters are pressed before heat treatment. Therefore, although the font is small, it is deep concave and very clear.

4. Whether the outer packaging is clear. The original brand of the factory has dedicated designers to design the outer packaging, and arrange production in factories that pass the production conditions. The packaging is very clear from the lines to the color blocks. Part of the imported brand accessory packaging also has a unique design designed to protect intellectual property rights.

5. Listen to the sound Hold the product and shake it to see if there is any noise. Most counterfeit products will inevitably be mixed with impurities such as sand in the production process, which are hidden in the bearing body, so noise will be generated when rotating.

FIXMAN focus on professional tools in automotive, constructionindustrial, and home use field. We have various of tool set options in home use field. pls check FIXMAN tool set catagories to get what u need.


Post time: Oct-09-2021